AO2040 AO2020 EL3020 gas analyzer ABB

Abb’s main analytical instruments include force measurement, process analysis, analytical instruments, natural gas metering and automation, recorders and indicators, pressure measurement products, actuators and locators, fieldbus and tools, flow measurement products, liquid level measurement products, temperature measurement, etc.

Technical data of ABB gas analyzer EL3020
The ABB EL3020 analyzer uses an inflatable climate radiation detector. The detector is filled with gas corresponding to the measured gas, which means that compared to other gas components in the sample, the detector provides * * sensitivity and high selectivity.

ABB EL3020 Infrared Gas Analyzer Product Features:
1. Double layer detector and optocoupler with good selectivity.
2. Low detection limit value
3. The gas path is made of corrosion-resistant materials (optional)
4. The sample chamber can be cleaned
5. Electrical and physical characteristics: airtight isolation, can be blown, protection level IP65
6. Heating type (optional)
7. EEx (p) explosion-proof, used for Zone 1 and Zone 2

Product parameters:
Main technical indicators of instruments
1. Analysis objects: CO, CO2, NO, SO2, NH3, H2O, CH4, and other hydrocarbons.
2. Weight: Approximately 15kg (1 infrared channel), approximately 21kg (2 infrared channels)
3. Power consumption: Single channel: approximately 40 VA, dual channel: approximately 70 VA
4. Power supply: 100-240VAC ± 10% 48-63HZ
5. Linear error: ± 0.5% FS
6. Response time:<3 seconds
7. Analog output: 0/2/4-20mA high load 750 Ω
8. Measurement drift: ± 1% FS/week
9. Large scale program: depending on the application
10. Small range: CO：0-10ppm CO2：0-5 ppm
11. Measurement range: Automatic switching between 4 measurement ranges

Application scope of gas analysis instruments
An analytical instrument used to continuously measure the concentration of individual components in gases or vapors.
Cannot measure flammable gases/air, or mixtures of gases and oxygen.
Gas analysis instruments (EL3020 and EL3040) equipped with stainless steel pipelines and fittings can be used to measure flammable gases and vapors in safe areas. Oxygen sensors and integrated gas analysis modules (only available in EL3020) cannot be used in analytical instruments for measuring flammable gases.
The gas analysis with explosion-proof device (EL3040) meets the explosion-proof requirements of LL3G and can measure non combustible gases and vapors in hazardous areas.

performance testing
EL3000 series gas analyzer
Uras26 (sample components CO, NO, SO2, CO2, N2O),
Magnos206 (sample component O2)
Electrochemical oxygen sensor (sample component O2)

IZE INDUSTRIES * distributor, commonly used ABB gas analyzer model:
ABB gas analyzer EL3020
ABB gas analyzer EL3040
ABB Infrared Photometer Uras26
ABB Oxygen Analyzer Magnos206
ABB Trace Oxygen Analyzer ZO23
ABB Thermal Conductivity Analyzer Caldos27